Directional Powder HSS P30

P30 is manufactured by our company's original creative "Directional process".

M35+V High Speed Steel

M35+V Base on M35 to use our unique technology EAF+LF+VD+RS ESR process which can add V to Maximum 2.5 to increase wear-resistance to improve the work life.

T1 W18Cr4V1 SKH2 1.3355 High Speed Steel

W18Cr4V is an omni-directional steel that can be used for cutting when hot and hard requirements are not the most important. W18Cr4V is also suitable for cold service; Examples are tools used for punching, forming, stamping, and other purposes.

M42 W2Mo9Cr14VCo8 SKH59 1.3247 High Speed Steel

The M42 steel has a high hardness of 68~70HRC, good heat hardness, high temperature hardness and easy grinding. but the toughness is slightly poor, and the lower limit should be used for quenching. Due to its good grindability, it can be used to manufacture a wide range of high precision and complex tools.

M35+V High Speed Steel

M35+V Base on M35 to use our unique technology EAF+LF+VD+RS ESR process which can add V to Maximum 2.5 to increase wear-resistance to improve the work life.

M35 W6Mo5Cr4V2Co5 SKH55 1.3243 High Speed Steel

M35 cobalt-containing high-speed steel, through appropriate heat treatment, can obtain high hardness (HRC67 ~ 70), high red hardness (625 ° C 4 hours, HRC 63 ~ 65) and high wear resistance, toughness and bending strength are not lower than ordinary High-speed steel can overcome early damage such as mold edge collapse and cracking.

M2 W6Mo5Cr4V2 SKH51 1.3343 High Speed Steel

M2 is a molybdenum high-speed steel, which has the advantages of small carbide non-uniformity and high toughness. It is easy to overheat, so the quenching temperature should be strictly controlled, and the protection requirements for heat treatment should be strict